Products产品中心
Maximum laser output power | 30W/50W/100W(Matching) |
Laser | Imported radio frequency laser |
Laser repetition rate | 20 |
Aiming beam | Red light, wavelength 635nm, 3MW |
Laser wavelength | 10.64um |
response time | 0.8ms |
Marking area | 50mm*50mm-300mm*300mm(Optional) |
Marking depth | 4mm |
Standard line speed | 7000mm/s |
Minimum character | 0.4mm |
Minimum line width | 0.1mm |
Repeat accuracy | 0.001mm |
Input power | 1.2kw |
Power requirements | 220V/single-phase、50Hz/8A |
Cooling mode | Water cooled / air cooled |
The machine is of wide application, can be carved most of the non-metallic materials: paper, leather, wood, plastics, organic glass, fabric, acrylic, bamboo and wood, rubber, crystal, jade, ceramics, glass and artificial stone and so on.
Leatherwear
Wool
paper
bamboo
plastic cement
wood